FS136H Plastic Mold Steel
One. Product Description
FS136H Mold Steel is a new type of high-quality injection mold steel. my country's GB\T standard grade is 4Cr13SiNiV mold steel.
FS136H Mold Steel is high-quality corrosion-resistant super-mirror plastic mold steel. The above refers to the Swedish S136 mold steel, which has stable performance and basically reaches the level of imported S136H. It is a high-quality plastic mold steel with very good cost performance.
Two. Quality Standard
ASTM A176 1999 Standard Specification
Three. Product Specifications
Four. Equivalent Grade of FS136H Mold Steel - For Reference Only
|
China GB |
Sweden SS |
Japan JIS |
US AISI |
Germany DIN |
Austria ONORM |
EU EN |
FS136H |
4Cr13SiNiV |
S136H |
SSTAR |
420H |
1.2083H | M310 | X42Cr13 |
Five. Product Features and Uses
Features:
1. After long-term use of S136 mold steel, the surface of the mold cavity still maintains the original smooth state. No special protection is required when handling or storing molds in wet environments.
2. Excellent corrosion resistance.
3. Electroslag Remelting (ESR).
4. Excellent mirror polishing performance.
5. Heat treatment is stable.
Use:
1. It is suitable for mold steel used in humid environment and weak acid and alkali environment, ESR remelting (A grade) steel is suitable for manufacturing optical instruments, lenses, lenses, etc.
2. Suitable for electronic parts, disposable tableware, utensils, cameras, sunglasses, chemical instruments and plastic products, medical equipment, etc.
3. Manufacture of optical products, such as cameras, sunglasses, chemical instruments, syringes, analytical instruments and plastic products.
4. Use high friction injection materials (including injection molds) or molds that need to work for a long time, such as electronic parts, discarded table knives, tableware, etc.
Six. Product Detailed Information
FS136H mold steel is a new type of high-quality injection mold steel. my country's GB\T standard grade is 4Cr13SiNiV mold steel. FS136H mold steel is high-quality corrosion-resistant super-mirror plastic mold steel. The above is Swedish S136 mold steel, with stable performance, basically reaching the level of imported S136H, it is a high-quality plastic mold steel with very good cost performance.
Corrosion and Strain Resistance:
For the use of corrosive PVC acetate (injection materials or molds such as ACETATESO must work and store in a humid environment, FS136H can resist the corrosive effect of water vapor, weak organic acids, dilute nitrates, carbonic acid) salts, etc., FS136H manufacture The molds will not rust and contaminate the beam when operating in wet environments or using corrosive plastic materials under normal conditions. It especially exhibits excellent corrosion resistance if tempered to 250°C and polished to a mirror finish.
Wear Resistance:
Use injection molding materials with more friction (including injection molds) or molds that require a long working time, such as electronic parts, discarded tableware, utensils, etc.